Becoming an Angle Frame Scale Stand Maintenance Expert
Angle Frame Scale Stands are an important item to have around to keep your expensive scales off the floor & on a dedicated surface, all while being mobile. They are quite common in bakeries, delis, or anywhere that relies on weighing ingredients for recipes or selling items by weight. With such versatile use, angle frame scale stands need to be in tip top condition to house your valuable scale. What should you look out for?
In this article, we'll review 3 maintenance tips for an angle frame scale stand that will be helpful in prolonging the life of yours. Let’s jump right in.
1. Check the Structure
The truth of the matter is commercial scales can be quite cumbersome. Many of the most well-known commercial scales can easily weigh 80-100 pounds by themselves. Angle frame scale stands can accommodate these scales easily, however.
A good tip is to check the structure of your stand itself for any dents, wear, or balancing issues. The frames can be slim (most being less than 2” x 2”) so make sure there is no damage.
Most stands are equipped with crossbracing for extra rigidity. Make sure this bracing is not bent or damaged as well.
2. Caster Inspection
Angle Frame Scale Stands are mobile so the casters will always be in use. With that said, make sure your casters are always travelling smoothly without hiccups. To ensure this, inspect the wheels for cracks or excessive wear & replace as needed. Remove any obstructions that may hinder movement. Evaluate the brakes for operation.
Casters may need occasional lubrication so apply a dry film lubricant if you are noticing your casters making loud squeaking noises or hitching up during travel.
3. Clean!
As with any other piece of equipment, cleaning is necessary. With the constant use of the scale, ingredients may coat the stand in dirt/debris. This means you’ll have to dive in deep & keep your stand in pristine condition.
Remember – no harsh cleaning chemicals or tools! Use a soft sponge & mild dish soap in a pinch. In extreme cases where the stand is absolutely covered in residue, you’ll want to achieve a more thorough cleaning. This can be done using a microfiber cleaning towel & an all-around cleaner such as baking soda.
Model #STS is IMC’s own angle frame scale stand designed to accommodate any commercial scale. Made from 14-gauge Type 304 stainless steel, STS can be sized according to your specific scale model #. To learn more about Model #STS, click here.
