Let’s Answer Your Questions About Tray & Basket Dispensers
Serving trays are a staple of any cafeteria or buffet operation. With so many trays in play, dedicated dispensers are used to store & organize unused trays. Baskets also temporarily hold wares such as cups & plates on the same product to keep things tidy & ready for use.
A combination tray & basket dispenser is the exact match for this, but what makes them so special & what should you look out for when considering one for your lineup? IMC has you covered.
In this article, we’ll answer 5 of your most asked questions about tray & basket dispensers. We’ll also detail out IMC’s offering to aid you in your journey. Let’s start off with the most important question.
1. What Size & How Many Trays/Baskets Do They Hold?
As far as capacity is concerned, it will vary from product to product. For IMC’s Model #140-516, it can hold (150) 15” x 20” (or 14” x 18”) trays & (10) 20” x 20” plastic or wire baskets. Both are assuming single stack.
It’s important to remember to use your discretion when stacking heavy items on the dispenser as going over the weight limit can lead to minor damage on the lift mechanism.
2. How Does the Self Leveling Mechanism Work Exactly?
Each dispenser comes with calibrated internal springs to adjust tension as items are removed, keeping the top tray or basket flush with the countertop or cart edge. The springs themselves are easily accessible, so you can adjust the tension level as you see fit.
3. Can They Hold Silverware?
While a typical tray/basket dispenser does not have the ability to hold silverware, there are several variations of the dispenser that enable you to hold your silverware in cylinders. IMC offers Model #TRDC, which offers an optional silverware dispenser furnished with (8) holders.
4. What Are Some Maintenance Tips?
The typical stainless steel care routine will apply here. That included wiping down the entire body with a non-abrasive cleaner & soft cloth then drying it completely. Don’t use any harsh chemicals or pads that might cause damage.
Remember to check the casters for any hitching as well. Inspect the casters for any unusual wear & tear or obstructions.
Finally, inspect the springs of the cantilever mechanism for any signs of damage. The springs are integral to the operation of the dispenser, so they need to always be in top condition.
5. Are The Trays & Baskets Included?
No, all trays & baskets are provided by others.
IMC tray & basket dispensers are designed to complement your cafeteria & buffet operations. With the above questions answered, you should be an expert on their use & importance. For a closer look at our dispensers, click here.
